Frozen pipes can be only fixed with the help of thawing. However, thawing must be done in a correct way to alleviate the chances of accidents and potential damage. The below-mentioned 7 tips may help you to do so and prevent your home and possessions from getting damaged by havoc flood.
Identify the location of the frozen pipe
Before you start thawing the pipes, determination of the exact location of the pipes and its area is essential. You can do so by detaching the faucets from the pipes and if you find that no or slight dripping comes out, then it must be due to freezing.
Whenever a pipe gets frozen, it increases the chance of freezing other pipes as well. Freezing of exposed pipes such as pipes in basements and under sinks can be easily detected. Slight bulging of the pipe may also get noticed sometimes. You have a number of options for thawing an exposed pipe in comparison to that of the enclosed pipes.
Open the faucet
Prior to start with the thawing procedure, you have to open the faucets for feeding the water inside it. Ensure that you have opened both cold and hot handles to feed the water. It will relieve the existing pressure within the system and allows the water to get passed through it easily during the thawing procedure.
From where thawing process must be started
Thawing must be started from the end of the faucet and gradually you should proceed towards the main blockage area. It is useful in melting the ice perfectly and even the steam can get released from the open faucet.
On the other hand, if the process is started near the main blockage, more pressure will be exerted on the pipe and the chance of the burst will be enhanced on its own.
Thaw the exposed pipes
Several options are available if it is about defrosting an exposed water pipe. You must apply the heat till the ice melts completely and come out from the pipe. Some options of thawing an exposed pipe are given below:
- Electrical Heating Tape: Wrap the pipe with this tape and turn on the electric supply. It will distribute the heat evenly via the pipe and defrost it within a short span of time. There no chance of risk as it is featured with auto-stop specification.
- Hot Towels: Wrap the frozen pipe with the towels dipped in the hot water as it will slowly defrost the frozen pipes.
- Portable Space Heater/ Heat lamp: Portable Space Heater or heat lamp is also effective in performing the thawing. The heat emits from the device has the potential to reach the frozen area and allows the ice to melt down. All you have to aware is about the safety and preventive measures while using the lamp.
- Hair Dryer: Thawing with the help of a hairdryer is probably the easiest way to do. Start thawing from the end of the faucet and proceed towards the main area to get the thaw done perfectly. As it is an electrical device, you must take additional precautions while using this or any other ones. Make sure that it doesn’t come into the direct contact with the faucet.
Thaw the enclosed pipes
If the frozen pipes are enclosed within a wall where you can get easy access, these three options can be useful to perform the thaw.
- Heat up the surrounding area well: You can easily defrost the enclosed pipes by increasing the temperature of the room. Turning on the thermostat is also another option to thaw the enclosed frozen pipe.
- Infrared Lamp: If you can locate the location of the frozen pipe within the wall, you may use infrared lamp to thaw it by placing it near the location in front of the wall. It will defrost the pipe progressively.
- Cut down the specific wall’s section: If you feel the need, you may breakdown the wall’s section to get the access to the frozen pipe to perform the thaw by any of the above availed steps. You may also hire the services of the one of the best plumbers in London to get the job done in the right way.
What should you avoid?
You should not try to thaw the frozen pipe using an open source of the flame. It will not only damage the pipes but can cause fire to your property resulting in wreaking havoc to your home and possessions.
When the pipe gets burst
If somehow the frozen pipes get burst, all you have to do at first is to stop the main water supply by turning off its main valve. It will protect your property and possessions from additional damage.
For this, you have to know where the main water valve is located in your property. You can also look for the sub-smaller water valves underneath the kitchen sinks and below the toilet respectively.
Call your professional plumber
- Hire the professional services: Don’t waste your time and hire the services of reliable professional plumbers in London, when you are unable to identify the exact location of freezing. Even you must also left it for the professional if you don’t know the thawing process in the right way.
Risks associated to thaw a frozen pipe
Primarily two risks are there you must be aware off while you are about to thaw the frozen water pipes. They are mentioned below for your reference:
- Burst Pipe: If the procedure is not performed in the correct manner then, there is a high chance of bursting the pipe. Make sure that while you are going to thaw the pipes you are strictly adhered to the safety instructions to get the job done in an appropriate way.
- Fire: If you use any heating source for thawing the pipes, then there can be a risk of catching the fire by your pipes. In this case too, you have to follow the safety instructions perfectly.
- Preventive measures for frozen pipes
Certain steps are there which can incorporate you to prevent the freezing and potential damage of the pipes further in future. Some of them are mentioned below:
- Shut off the interior valves that feed the hoses and remove the exterior hoses
- Install additional insulation
- Seal up the cracks and holes
- Keep the interior doors open
- Allow the faucets to drip slightly
- Keep the switch of the heating on throughout the day
If you find any complexity in performing the thawing procedure, there is no need to take the risk. Leave the job for the professional! Search for the who will do the job for you relatively at an affordable rate of price.